Adding Static Routes

1. Navigate to the POLICY | Rules and Policies > Route Policy page.

2. Click Add.

   The Add Route Policy dialog displays.

   

3. In the Name field, enter a friendly name .

4. In the Description field, enter a descriptive comment.

5. Select the IP Version; IPv4 or IPv6.

6. Select the Route Type:

   • Standard Route (default)
   • Multi-Path Route
   • SD-WAN Route

7. In the Metric field, specify the RIP metric.

8. In the Lookup/Next Hop section, enter the following information:

   1. From the Source drop-down menu, select Any.

   2. From the Destination drop-down menu, select the destination address object.

   3. Specify the type of service that is routed from Service Object.
      • Service
      • App
9. In the Next Hop section, enter the following information:

Based on the selected route type, the Next Hop fields vary.

1. From the Interface drop-down menu, select the interface through which these packets are routed.

2. From the Gateway drop-down menu, select the address object that acts as a gateway for packets matching these settings.

   To create a new address object, click edit icon > New Address Object > add address object details and click Save

10. Click Add.

The static route uses the Azure internal gateway 10.5.1.1.