Removing an HA Association

You can remove the association between two SonicWall firewalls on MySonicWall at any time. You might need to remove an existing HA association if you replace a firewall or reconfigure your network. For example, if one of your SonicWall firewalls fails and you need to replace it, or you might want to swap the Primary and Secondary roles after a network reconfiguration. In either case, you must first remove the existing HA association, and then create a new association that uses a new firewall or changes which unit is the Primary firewall and which is the Secondary firewall (see Replacing a SonicWall firewall).

To remove the association between two registered SonicWall firewalls:

1. Log in to MySonicWall.
2. In the left navigation bar, navigate to My Workspace > Tenant Products.
3. Scroll down to find the secondary firewall from which you want to remove associations. Click the serial number.
4. On the Products Details page, scroll down to the Parent Products section, just below the Associated Products section.
5. Under Parent Products, to remove the association for this firewall:
   1. Click Remove under ACTIONS.
   2. Wait for the page to reload.
   3. Scroll down.
   4. Click Remove again.