Configuring the SonicPoint/SonicWave L3 Management Default Device Profile

To configure Client Settings

1. Navigate to the Network > SSL VPN > Client Settings > SonicPoint L3 Management Default Device Profile tab.

2. Click edit icon on the Name.

   

   The Edit Device Profile is displayed.

   

   The Name and Description of the Default Devices Profile for SonicPoint/SonicWave cannot be changed.

3. For the zone binding for this profile, on the Settings tab, select SSLVPN or a custom zone from the Zone IP V4 drop-down menu.

4. From the Network Address IP V4 drop-down menu, select the IPv4 NetExtender address object that you created.

   This setting selects the IP Pool and zone binding for this profile. The NetExtender client gets the IP address from this address object if it matches this profile.

5. In the Client Routes tab select the address object under Networks to which you want to allow SSL VPN access.

   

6. Click the right arrow button to move the address object to the Client Routes list.

   Creating client routes causes access rules allowing this access to be created automatically. Alternatively, you can manually configure access rules for the SSL VPN zone on the Policy > Access Rules page.

   After configuring Client Routes for SSL VPN, you must also configure all SSL VPN NetExtender users and user groups to be able to access the Client Routes on the Users > Local Users or Users > Local Groups pages.

7. In the SP L3 Settings tab select an interface from the WLAN Tunnel Interface drop-down menu.

   

8. Click OK.