Monitoring SD-WAN

A chart may be empty or blank if there are no recent data entries received within the viewing range.

To monitor SD-WAN SLA

1. Navigate to Monitor | SD-WAN > SDWAN Monitor.
2. From SD-WAN Probes drop-down box, select the SLA probe you would like to use to monitor.
3. Indicate the Refresh rate, in seconds, in the Refresh Every field.
4. Select a View Range:
   • 60 seconds (default)
   • 2 minutes
   • 5 minutes
   • 10 minutes
5. Choose an interface to track or select All Interfaces from the drop-down menu on the right side.