Configuring Settings on the General Tab

On the General tab, begin defining the site to site VPN policy. There are some slight differences between IPv4 and IPv6 networks, which are noted.

IPv4 +Add VPN Policy: General

1. If configuring an IPv4 VPN, select Policy Type from the drop-down menu.

   The Policy Type field is not available for IPv6.

2. Select the authentication method from the Authentication Method drop-down menu. The remaining fields in the General tab change depending on which option you select. The following options are available.

   IPv4	IPv6
   Manual Key	Manual Key
   IKE using Preshared Secret (default)	IKE using Preshared Secret (default)
   IKE using 3rd Party Certificates	IKE using 3rd Party Certificates
   SonicWall Auto Provisioning Client
   SonicWallAuto Provisioning Server

3. Type in a Name for the policy.
4. For IPsec Primary Gateway Name or Address, type in the gateway name or address.
5. For IPsec Secondary Gateway Name or Address, type in the gateway name or address.

6. Under IKE Authentication, provide the required authentication information.

   When configuring IKE authentication, IPv6 addresses can be used for the local and peer IKE IDs.