SonicOS 7 Internal Wireless
- SonicOS 7
- Wireless Overview
- Status
- Settings
- Security
- Advanced
- MAC Filter List
- IDS - Wireless Intrusion Detection Service
- Virtual Access Point
- SonicWall Support
Station Status
In the Internal Wireless > Status page, the Station Status screen displays information about wireless client devices currently associated with the wireless security appliance.
| Wireless Information | Description |
|---|---|
| Station | The name of the wireless client device |
| MAC Address | The hardware address of the wireless network card on the client device |
| Vendor | The vendor who manufactured the client station |
| SSID | The service set identifier of the wireless radio to which the client station is connected |
| Authenticated | Status of the client authentication |
| Associated | Status of the wireless association between the client station and the SonicWall wireless appliance |
| AID | Association ID, assigned by the security appliance |
| Signal | Strength of the radio signal |
| Connect Rate | Speed of the connection between client station and wireless appliance, generally in Mbps |
| Timeout | Number of seconds left in the session |
| Configure |
Options for controlling the client station:
|
- allow the station to connect to the security appliance and add it to the Allow MAC Filter List.
- block the station from connecting to the security appliance and add it to the Deny MAC Filter List.
- logout and disassociate the station from the security appliance.Was This Article Helpful?
Help us to improve our support portal