• SonicOS 7
• Package Contents
• Front Panel
• Back Panel
• Mounting Options
  • Wall Mounting the TZ Appliance
• Determining the WAN Type
• System Requirements
• Connectivity and Power
• Setup Options
• Running the Setup Wizard
• Testing and Troubleshooting Connectivity
• Registering a TZ Appliance
• Configuring TZ Wireless LAN Settings
• Uploading the Latest Firmware
• Enabling PoE on the Appliance
• SonicWall Support
  • About This Document

Configuring TZ Wireless LAN Settings

To configure the TZ Wireless settings for a LAN

1. Log in to your TZ Wireless appliance and click the Wizards icon at the top of the screen.

2. Select the radio button for the Wireless Guide wizard.

   

3. Click Next and follow the prompts in the Wireless Guide wizard. For more information and complete procedures, refer to the latest SonicOS Quick Configuration Guide.

For international (non USA or Japan) TZ370 Wireless appliances, you are asked to select a country code when using the Wireless Guide or when you initially navigate to the DEVICE | Internal Wireless > Settings page. Be sure to select the country code for the country in which the appliance is deployed, even if you are not currently in that country.

If you select the country code for Canada, it cannot be changed except by contacting SonicWall Support.