• SonicOS 7
• Package Contents
• Front Panel
• Back Panel
• Mounting Options
  • Wall Mounting the TZ Appliance
• Determining the WAN Type
• System Requirements
• Connectivity and Power
• Setup Options
• Running the Setup Wizard
• Testing and Troubleshooting Connectivity
• Registering a TZ Appliance
• Configuring TZ Wireless LAN Settings
• Uploading the Latest Firmware
• Enabling PoE on the Appliance
• SonicWall Support
  • About This Document

Wall Mounting the TZ Appliance

Do not mount the appliance on the ceiling, it is not designed for secure ceiling mounting.

For optional wall mounting, you need:

• Screwdriver
• Drill with appropriate size bit
• For mounting on drywall:
  • Two #6 pan-head screws, 1 inch long (7mm diameter head, 25mm long)
  • Two wall anchors
• For mounting on solid wood or metal:
  • Two #6 pan-head wood or machine screws, 1 inch long (7mm diameter head, 25mm long)

To mount the appliance on the wall

1. Drill two holes 4.5 inches (11.5 cm) apart in the wall where you want to mount the appliance.
2. If using wall anchors, insert a wall anchor into each hole.
3. Insert a screw into each wall anchor (into each hole if not using wall anchors), leaving 3/16 inches (0.45 cm) of the screws exposed (including screw head).
4. Position the appliance mounting slots over the screws and press in and down until the appliance is securely mounted.