Configuring the Wireless LAN Controller

To enable wireless controller mode

You must reboot the firewall after changing Wireless Controller modes.

1. Navigate to Device | Settings > Administration.
2. Click Audit/SonicOS API.
3. In the Wireless LAN Controller section, select any one of the options from the Wireless Controller Mode drop-down menu:

   • Wireless-Controller-Only (default)

     This option enables wireless controller mode

   • Non-Wireless

     This option enables non-wireless controller mode

   • Full-Feature-Gateway

     This option enables normal firewall mode

     

4. After you select the appropriate wireless controller mode, click OK in the warning message displayed.
5. Click Accept.