Secure Mobile Access 12.5 Getting Started Guide for ESXi

Technical Documentation>  Registering and Licensing Your SMA 8200v>  Registering the SMA 8200v
Table of Contents

Registering the SMA 8200v

After you have installed and configured the network settings for your SMA 8200v-standalone appliance, you can log into the management console and register it to your MySonicWall account.

Registration is required to unlock full system functionality.

To register your SMA 8200v-Standalone:

  1. In the browser, enter the IP address of SMA 8200v along with a colon followed by the port number.

  2. On the AMC login page, enter the username and password.

  3. Click Login.

  4. Navigate to System Configuration > General Settings > Licensing and click Edit.

    The Manage License page is displayed.

  5. Under the Online Licensing section, click Register.

  6. Enter the MySonicwall username and password.

  7. Enter the Serial number and Authentication code.

    To obtain your serial number and authentication code, contact SonicWall Sales at https://www.sonicwall.com/customers/contact-sales.
    If the serial number is already used with another installation, the Replace existing appliance checkbox is displayed. Select the Replace existing appliance checkbox to deregister already registered appliance and proceed with registering this new appliance.

  8. Enter the Friendly name for the appliance.

  9. Click OK.

    You have successfully registered your SMA 8200v-standalone appliance.