Template Parameters

The following parameters are displayed in the AWS CloudFormation console during deployment.

Parameter	Description	Default	Required When
KeyPair	EC2 key pair for SSH access to the appliance.	(none)	Always
ApplianceVpcCidr	IPv4 CIDR for the appliance VPC.	10.100.0.0/16	Always
ApplianceSubnetCidr	IPv4 CIDR for the appliance subnet.	10.100.1.0/24	Always
RedirectAll	Enable redirect-all tunnel mode via AWS NAT Gateway. Incompatible with Ipv6.	false	Optional
Ipv6	Enable IPv6. Incompatible with RedirectAll.	false	Optional
StaticPoolCidr	IPv4 CIDR for Connect Tunnel static IP pool. Must not overlap VPC or remote CIDRs.	10.101.0.0/16	Always
StaticPoolV6Cidr	IPv6 CIDR for static pool. Required when IPv6 is enabled.	(none)	If Ipv6=true
SiteToSiteVpn	Create an IPsec site-to-site VPN to a remote gateway.	false	Optional
SiteToSiteRemoteGatewayPublicIp	Public IP of the remote gateway (NSv or other).	(none)	If VPN=true
SiteToSiteRemoteGatewayBgpAsn	BGP ASN of the remote gateway.	65000	If VPN=true
SiteToSitePreSharedKey	IPsec pre-shared key. 8-64 alphanumeric characters, periods, underscores. Cannot start with zero.	(none)	If VPN=true
SiteToSiteRemoteCidr	IPv4 CIDR of the remote network. Traffic to this CIDR routes through the VPN.	(none)	If VPN=true

RedirectAll and IPv6 cannot both be set to true in the same deployment.