• Secure Mobile Access 12.4
• Introduction to Connect Tunnel
  • About Connect Tunnel
  • Guide Conventions
  • Resources Available from Connect Tunnel
  • Downloading and Installing Connect Tunnel
• Connect Tunnel Client for Windows
  • Launching VPN Connection
  • Launching VPN Connection using Network Logon
  • Launching VPN Connection using Always-ON VPN (AoV)
  • Launching VPN Connection using Device VPN
  • Using Connect Tunnel
    • Viewing Connect Tunnel Status
    • Logging into Connect Tunnel
    • Choosing a Login Group
    • Processing Server Certificates
    • Disconnecting from Connect Tunnel
  • Customizing Connect Tunnel
    • Viewing Current Settings
    • Connecting to a Different VPN
    • Configuring Split Tunnel Mode
    • Configuring a Device VPN connection
    • Updating the Connect Tunnel Application
  • Provisioning of Connect Tunnel using SCCM or Intune
    • Support for using default browser for SAML Authentication
  • Troubleshooting Connect Tunnel
    • Unable to Connect
    • Troubleshooting ESP
    • Unable to Access Resources or the Internet
    • Using Logs
    • Installation Fails
    • EPC Zone Classification doesn't work as intended
    • OpswatWrapper Init Error
• Connect Tunnel Client for macOS and Linux
  • System Requirements for MacOS
  • System Requirements for Linux
  • Starting Connect Tunnel
    • Connect Tunnel on macOS
    • Connect Tunnel on Linux
    • Specifying a Login Group
    • Connecting to a Different VPN
    • Quitting Connect Tunnel
  • Managing Configurations
    • Viewing Connect Tunnel Settings
    • Deleting a Configuration
      • Editing Connect Tunnel Settings
    • Creating a New Configuration
    • Selecting the Advanced Button
    • Advanced Options
    • Credential Caching/Secure Network Detection
  • Processing Server Certificates
  • Configuring Proxy Server Settings (Linux Only)
  • Troubleshooting
    • Unable to Connect VPN
    • Troubleshooting ESP
    • Unable to Access Resources or the Internet
    • Unable to Access Resources on Linux
• SonicWall Support
  • About This Document

Choosing a Login Group

Connect Tunnel allows you to choose the group or location you want to log into. This might be different at different times. (For example, you might sometimes login to the Sales group and at other times the Marketing group.) You may need to provide different authentication credentials for each login group.

You must specify a login group each time you initiate a connection to your VPN. This option is available only when Connect Tunnel is off-line (that is, when it is not connected to your VPN). You do not need administrator privileges to change a host name or login group.

To specify the login group

1. Launch Connect Tunnel.

2. Click on the Edit Configuration icon next to the Configuration drop-down list.

   

3. Click on the Forget Selections icon next to the Name field, then click Apply.

   

4. Click Apply.

5. Select or type the name of the login group you want to log into.

   

   Depending on how your administrator has configured Connect Tunnel, some login groups may not appear in the list. However, you can still log into a “hidden” login group, if you are authorized to do so, by typing its name.

6. Click OK.