Secure Mobile Access 12.4 Administration Guide

LCD Controls for the SMA 7200,7210 and SMA 6200,6210

Use the four-button keypad to the right of the LCD display on the SMA 6200,6210 and 7200,7210 appliances to:

  • Display status and configuration information about the appliance.
  • Shut down or reboot the appliance.

SMA 6200,6210 and SMA 7200,7210 appliances: Remove any USB devices from the appliance before you reboot it. If a USB device is plugged in to your appliance when it is rebooted, the appliance tries to use it as a boot device. As a result, the boot information stored in the BIOS on the appliance is overwritten, and the device becomes unusable.

LCD KEYPAD FUNCTIONS
Keypad FunctionDescription
Left button

Press the Left button once to reboot the appliance. This prompt is displayed:

Restart appliance?

<Yes No>

Press the Left button again to reboot the appliance, or press the Right button to cancel the reboot.

Up button

Press the Up button once to display the configuration of the appliance’s network settings. Each time you press it, the display shows another network setting:

  • Internal address

  • External address

  • Default gateway

  • Host name

  • Domain name

  • IP address

  • Netmask

Right button

Press the Right button once to shut down the appliance. This prompt is displayed:

Shut down now?

<Yes No>

Press the Left button again to shut down the appliance, or press the Right button to cancel the shutdown.

Down buttonTo return to the default view at any time, or to refresh the display, press the Down button once.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.