Secure Mobile Access 12.4 Administration Guide

Configuring Basic Network Settings

To start Setup Wizard you must first enter information that enables a Web browser to connect to your appliance. The recommended procedure for initial setup is to use the LCD controls (to the right of the LCD screen on the front of your appliance) to enter minimal settings and then run Setup Wizard. Alternatively, you have the option of using Setup Tool on the command-line. These procedures are outlined below:

After your basic settings are entered you will be able to run the Web-based Setup Wizard, as described in Web-Based Configuration Using Setup Wizard.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.