Secure Mobile Access 12.4 Administration Guide

Adding Dynamic IP Address Pools

To add a dynamic IP address pool

  1. In the AMC, navigate to System Configuration > Services.

  2. In the Access Services section, under Network tunnel service area, Configure. The Network Tunnel Service page displays.

  3. In the IP Address Pools section, click the + (New) icon. The IP Address Pool page displays.

  4. In the Name field, type a name for the address pool.

  5. In the Description field, type a descriptive comment about the address pool.

  6. Click Routed address pool - dynamic.

  7. By default the DHCP server field is blank; the appliance sends broadcast requests to locate DHCP servers and uses them to allocate addresses. Leave this box blank unless you need to configure a specific DHCP server.

  8. Click Save. (DHCP address pools ignore the Advanced settings on this AMC page.)

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.