Secure Mobile Access 12.4 Administration Guide

Enabling a Route to the Internet

If Routing mode is set to Single gateway, unrestricted you can still enable a route to the Internet for your network tunnel clients, provided your appliance is dual-homed (both internal and external interfaces are enabled). When Enable route to Internet is set, all tunnel traffic originating from the client and destined for the Internet (running in “redirect all” mode) will be routed to the specified IP address instead of being discarded.

To enable a route to the Internet

  1. In the AMC, navigate to System Configuration > Network Settings.

  2. In the Routing section, click Edit.

    The Routing page displays.

  3. Expand the Advanced section.

    The Connect Tunnel area appears.

  4. Select the Enable route to Internet checkbox, and then type the IP address of your Internet router.

  5. Click Save.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.