Manual: Provides options to configure the modes, their priorities, and the choose method. At least one mode should be enabled in the selection box.
The launch sequence is as follows: HTML5 and Native. Selecting Manual allows you to change, enable, or disable the launch methods. If you select Native to launch the RDP bookmark, then the SMA Connect Agent launches the RDP Receiver on the local machine to do the RDP connection.
The up and down arrows are used to adjust the launch priority. Fork and tick are used to disable or enable the modes. Disabled modes are put at the bottom of the list with a gray font color.
The Choose during Launch option is not enabled by default under the Manual mode. In this setting, while launching the bookmark, the first available mode in the configured list is run at once after auto-detection.
After the Choose during Launch option is enabled, while launching the unified bookmark, if there are multiple modes available for the client, a menu is provided from which you can choose within a five second count-down. When only one mode is available, the bookmark is also run immediately.
If the Remember my choice option is selected during the launch time, the selected mode is remembered through a cookie.
That means, when next launching the bookmark, the remembered mode is run directly within two seconds. Clicking anywhere in the HTML can 'forget' the remembered mode so you can re-choose.
Editing or deleting the bookmark in the same browser can also reset the remembered mode. When no modes can run on the client with the configuration, the following notice appears.