Secure Mobile Access 100 10.2 Administration Guide

Enabling Interface Monitoring

In the Interface Monitoring section of the page, you can enable monitoring of the working interfaces to which VPN users connect.

The monitored interfaces available for selection are X0, X1, and X2. When Interface Monitoring is enabled and configured, if any of the monitored interfaces loses connectivity on the active unit and is still reachable on the idle unit, failover occurs.

To enable interface monitoring

  1. On the High Availability > Settings page under Interface Monitoring, select Enable Interface Monitor.
  2. In the Monitor Interfaces list, select the interfaces you want to monitor.
  3. Click Accept.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.