Secure Mobile Access 100 10.2 Administration Guide

Importing a Device

To import a new device

  1. Navigate to the Device Management > Devices page and click IMPORT DEVICES. The Import Devices page appears.

  2. Enable Keep device settings if the device has existed to keep device settings. Otherwise the deleted device settings are deleted.
  3. Under Device Status, select one following device statuses for the imported device:

    • Keep Unchanged – the status of all imported devices is kept as those in the file.
    • Approved – the status of all imported devices is set to Approved.
    • Rejected – the status of all imported devices is set to Rejected.
    • Pending – the status of all imported devices is set to Pending.
  4. Select the file and click Open to import the device.
  5. Click UPLOAD to update the configuration. The imported device is displayed on the Device Management > Devices page.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.