Secure Mobile Access 100 10.2 Administration Guide

User Backup Codes

You can create, enable, or disable backup codes in the domain settings after successfully logging in for the first time. This option is only available when 2FA is setup and is only applicable when one-time passwords are enabled. The backup code is designed as a fail-safe option in the event the user misplaces the 2FA device / token or when they are unable to receive it because of their location. Examples would be while in flight where SMS messages might not function properly or when the user can have only one device connected to a wireless network.

  1. After successfully logging in to the Virtual Office, click the circle with your initials again in the upper right corner.
  2. Choose Settings.
  3. Choose Generate Backup Keys.

  4. After clicking Generate Backup Key, a text file is downloaded to your computer. This text file contains the backup keys that can be used. These are a one-time use only key. Do not lose them. If you press the button more than once, it generates additional text files, however, only the last set of numbers are valid for use.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.