Configuring Closed Network NSM

After you complete the Closed Network setup on MySonicWall, you can go to your NSM system to import the licenses.

There are two ways to import the license file. You can import through:

• Setup Wizard

• Closed Network page

To import the file from Closed Network page

1. Log in to your NSM system using your administrator credentials.

2. Navigate to Manager View | HOME > Settings > Closed Network.

   

3. On the Import Signatures / Licenses tab, click Import.

   

4. Click Browse to find the file that you generated in step 3 of Generating the Encrypted Files.
5. After selecting it, click Upload, and the system tells you when the file is successfully uploaded.
6. Navigate to Manager View | HOME > Settings > Licenses to confirm that Closed Network licenses were updated.

7. Refer to Manager View | HOME > Settings > Closed Network and select the Device License tab to see the devices managed by this NSM system.

   The devices listed in the Device License tab are the same that are listed in MSW for this instance of NSM.

To import the file from Setup Wizard

1. Log in to your NSM system using your administrator credentials.

2. Click the Setup Wizard icon on the top-right corner of the Manager View | System page.

   

3. In the REGISTRATION tab:

   • Enable the Register for Closed Network toggle button.

   • Click Add File and select the license file that you generated in step 3 of Generating the Encrypted Files.

   • Add the other details.

     Serial Number, Auth Code, and Friendly Name you can get from MySonicWall page.

   • Click Configure.

   

4. For other tabs the registration process is same a basic NSM registration. Refer to Registering a Controller.