• NSM Closed Network 2.2
• Overview
  • About Network Security Manager
  • Closed Network Description
  • Conventions
    • Guide Conventions
    • UI Conventions
  • Related Documents
• System Requirements
  • Browser Levels
  • Minimum System Configuration
  • MySonicWall
  • Firewall Types and Firmware
• Deploying NSM
• NSM Licensing
  • MSW Configuration
  • Enabling Closed Network
  • Associating the Nodes
  • Generating the Encrypted Files
• Getting Started with the Closed Network NSM
  • Configuring Closed Network NSM
  • Adding Firewalls
• SonicWall Support
  • About This Document

Deploying NSM

Setting up a Closed Network system follows the same process as for regular on-premises systems. Refer to the Getting Started Guides for the appropriate platform for details. The following provides a checklist for your implementation:

1. Download a copy of your image file from MySonicWall.
2. Prepare your system for NMS installation. Steps may vary so refer to the appropriate Getting Started Guide for details.
3. Install and deploy NSM on your system.
4. Configure and enable Closed Network on MySonicWall. Refer to NSM Licensing for the details.
5. Configure your Closed Network on the NSM side. Refer to Getting Started with the Closed Network NSM for the details.