Capture Client Getting Started Guide For Unified Management

Technical Documentation>  Configuration
Table of Contents

Configuration

When you navigate to a new tenant for the first time in the management console, an automatic popup shows asking if you would like to configure the Tenant settings before you get started.

You can choose to dismiss this or get started. If you dismiss it, you can revisit these settings any time by either editing the tenant from the Scope Selector at the top or by navigating to Capture Client > Management > Tenant Settings in the specific Tenant scope.

When you choose to edit the Tenant settings, it launches the Tenant Settings wizard.

To edit the Tenant settings

  1. Navigate to Capture Client > Management > Tenant Settings.

  2. In the BASIC SETTINGS tab:

    • In TENANT SETTINGS section:

      • Set the frequency to upgrades by clicking the Edit icon under Perform Upgrades At.

      • Enable/Disable the Device File Fetch Feature.

    • In REPORT LOGO section:

      • Set the REPORT LOGO,
        1. Click the Edit icon to set the logo.
        2. Click Choose File.

        3. Select the logo file and click Open.

          The image should be 128x128 pixels in size for best results. Images of other sizes are scaled.

    • In CLIENT CUSTOMIZATION section:

      • Enter a custom note in the CLIENT CUSTOMIZATION text box.

        There is an ability to Search within this section

    • In the TENANT NOTES section:

      • Enter the TENANT NOTES.

        There is an ability to Search within this section

  3. In the SYSLOG SETTINGS tab:

    1. Slide the switch under SysLog section to green.

      If you select the Enable Inheritance option, you cannot edit the SysLog settings as the parent scope SysLog settings changes are automatically enforced.

    2. Specify the Host.

    3. Select the TLS checkbox to enable TLS Secure Connection.

    4. If TLS checkbox is selected, certificate needs to be uploaded for TLS authentication and policy.

    5. Select the Information Format options.

  4. Click Confirm to review the policy.

    This shows the current state of the tenant, indicating that all policies are inherited by default from a parent element. This has best practices enabled for Malware protection, but other settings are likely empty. You can also pivot to create groups for your tenant that allows further customization of policies.

  5. Review the policy and click Done.

Chat