SonicOS 7 TZ Series Getting Started Guide
Table of Contents
Front Panel
|
||
|
U0 | U0 Port: USB 3.0 SuperSpeed (SS) Port for WWAN |
|
SS
|
USB SS 3.0 Port: For Configuration, Recovery, Re-imaging the TZ |
|
|
Power LEDs: 1 = Primary, 2 = Redundant Blue = Powered on, Yellow = Defective adapter |
|
|
Test LED: Yellow = Initializing, Blinking Yellow = SafeMode |
|
|
Security LED: Green = All Security Services Licensed, Blinking Yellow = Security Services License Expired Security Services monitored by this LED: Gateway Anti-Virus, Intrusion Prevention, Anti-Spyware |
|
|
Storage LED: Solid Green = Extended Storage module present, Blinking Green = Activity, Yellow = Storage warning |
|
|
Wireless W0 WLAN LED (TZ570W only): Solid Green = Wireless radio is active, Blinking Green = Activity |
|
X0 | LAN/MGMT X0 Port LED: Solid Green = 1G link, Blinking Green = 1G activity |
|---|---|---|
|
X1/X2 | WAN X1 and X2 Port LEDs: Solid Green = 1G link, Blinking Green = 1G activity |
|
X0-X7 | RJ45 Port LEDs: Solid Green = 1G link, Blinking Green = 1G activity |
|
X8-X9 | SFP/SFP+ Port LEDs: TZ670: Solid Orange = 10G, 5G or 2.5G link, Blinking Orange = 10G, 5G or 2.5G activity TZ570/TZ570W/TZ570P: Solid Orange = 5G or 2.5G link, Blinking Orange = 5G or 2.5G activity All Models: Solid Green = 1G link, Blinking Green = 1G activity |
|
|
U0 WWAN LEDs for USB 5G/LTE: Green = 5G/LTE signal strength |