Wireless Network Manager 3.5 Administration Guide

RF Monitor

The RF Monitor feature provides Radio Frequency (RF) improvements to support spectrum visualization and analytics. RF interference can be better mitigated through the improved tools available on the RF Monitor screen.

These include automated RF channel interference detection, and powerful tools for administrators needing to troubleshoot at deeper layers of the RF environment, and perhaps manually adjust radio settings.

One of the columns of data collected is the RSSI (Received Signal Strength Indicator). This is an indication of whether the signal is strong enough to get a good connection.

RF Monitor is disabled by default.

To activate RF Monitor

  1. Navigate to Policies > Network Policies.
  2. Select the network policy for which you want to enable RF monitoring.
  3. Navigate to Policies > Policy Hierarchy > WIDP.
  4. Activate RF Monitoring.
  5. Change the duration of the Measurement Interval (Seconds) if you want it to be different from the default value.
  6. Click OK.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.