WiFi Cloud Manager 3.0 Getting Started Guide

Adding an Access Point Device to a Zone

When first logging onto WiFi Cloud Manager, you might have to wait a few moments for the device inventory to synchronize with WiFi Cloud Manager. Then you can add a new access point device to any of the zones in your hierarchy. All of the devices under the same zone have the same configuration.

To add a device to a zone

  1. Navigate to Network > Zones.

    The page shows the current hierarchy, with the policies and device count in each zone in the bottom panel.

    Hover over the zone row to display the available options on the far right.

  2. Click Edit/Config next to the zone you wish to edit or add a device. The Edit Zone screen displays.

  3. In the Zone Devices section, click Plus (+) on the right. The Edit Zone/Add Devices to Zone page displays.

  4. Fill in the information about your device.
  5. Click Add.

The device is added to the zone and to the Zone Devices list.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.