Quality of Service (QoS)

Following are the fields in the section:

1. QoS Enable: Toggle to enable.
2. Select the Trust Mode. The options are 802.1p, DSCP or both together. Trust mode helps you to enable to trust any CoS packet marking at ingress.
3. Select the Scheduling Method. Options are Strict Priority and WRR.
4. If you select WRR scheduling method, specify the class of service priority value - COS (the range is from 0 to 7), DSCP (the range is from 0 to 63), WRR (the range is from 0-128).

To activate QoS

1. Navigate to Policies > Policy Hierarchy > Switch Policy.
2. Select the System tab and scroll down to the QoS section.
3. Enable the toggle bar, QoS Enable.
4. Select the Trust Mode. The options are 802.1p, DSCP or both together. Trust mode helps you to enable to trust any CoS packet marking at ingress.
5. Select the Scheduling Method. Options are Strict Priority and WRR.
6. If you select WRR scheduling method, specify the class of service priority value - COS (the range is from 0 to 7), DSCP (the range is from 0 to 63), WRR (the range is from 0-128).