Access Points and Switches Management Administration Guide

Technical Documentation>  Policies>  Policy Hierarchy>  AP Policy>  Radio
Table of Contents

Radio

When you navigate to AP policy > Radio tab, there are two section displayed 2.4 GHZ and 5 GHZ and both these section have the following fields

  • Short Guard Interval: Toggle to enable or disable

  • Aggregation: Toggle to enable or disable

  • Beacon Interval (milliseconds)

  • RTS Threshold: Set RTS to zero to disable it.

  • Maximum Client

  • Client Inactivity Timeout (seconds)

  • RSSI: Toggle to enable or disable RSSI for setting a threshold limit. in a high density Wi-Fi deployment, the user can set a desired RSSI Threshold on SonicWave. When a SonicWave goes off to prevent a low RSSI client connection, the client device can navigate to a nearby access point and get a higher connection rate and quality.

  • Wi-Fi Multimedia Profile

Click OK to save the configuration and return to the General screen.

Chat