SonicOSX 7 Users for the NSsp Series

Editing Partitions

You can edit all partitions, including the Default partition.

To edit a partition

  1. Navigate to Users > Partitions.
  2. In the Authentication Partitions table, click the Edit icon in the Configuration column of the authentication partition you want to modify. The Edit authentication partition dialog displays.
  3. You can change the partition’s name in the Partition Name field. The name can be 1 to 32 alphanumeric characters in length.
  4. You can change a partition from a top-level partition to a subpartition or from a subpartition to a top-level partition by changing the Partition Type. Choose whether the authentication partition is now to be:
  5. A top-level partition that has subpartitions cannot be changed to a subpartition unless you first delete the subpartitions, reallocate them to a different top-level partition, or make them top-level partitions.
    • A top-level partition
    • A sub-partition

      1. The Parent partition menu displays.
      2. Select a parent partition from the Parent partition drop-down menu. The default partition is Default.
  6. To edit a domain:
    1. Select a domain to edit by clicking on it.
    2. Click Edit. The Edit domain dialog displays.
    3. Change the domain name.
    4. Click OK.
  7. To delete a domain:
    1. Select the domain you want to delete.
    2. Click Remove.
  8. To: add a domain
    1. Under the Domain(s) list, click Add. The Add domain dialog displays.
    2. Enter a domain name, which can be 1 to 32 alphanumeric characters in length.
    3. Click OK.
  9. Repeat the appropriate steps for each domain you want to add, edit, or delete.
  10. Optionally: Enter a comment in the Comment field.
  11. Click Save.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.