SonicOSX 7 Users for the NSsp Series

Automatically Assigning Servers, Agents, and Clients

You can use the Auto Assign button to assign any unassigned servers, agents, and clients, based on their IP addresses or host names, to the relevant partitions automatically.

To auto assign servers, agents, and clients

  1. Navigate to Users > Partitions.
  2. In the Authentication Partitions table, click the checkbox(es) of the authentication partition(s) to which you want to assign unassigned servers, agents, and/or clients. You can select more than one partition. Auto Assign becomes available.
  3. Click Auto Assign. The auto-assign message appears.
  4. Click OK.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.