• SonicOS and SonicOSX 7
• Using Packet Monitor
  • Benefits of Packet Monitor
  • How Does Packet Monitor Work?
  • Supported Packet Types
  • Configuring Packet Monitor
    • Configuring General Settings
      • Configuring General Settings
      • Configuring the Monitor Filter
      • Configuring Display Filter Settings
      • Configuring Logging Settings
      • Configuring Advanced Monitor Filter Settings
    • Starting and Stopping Packet Mirror
  • Monitoring Captured Packets
    • Starting and Stopping Packet Capture
    • Configuring Mirror Settings
  • Viewing Packet Monitoring Statistics
    • Capture Statistics
    • Local Mirror Statistics
    • Remote Mirror TX Statistics
    • Remote Mirror RX Statistics
    • FTP Statistics
      • Restarting FTP Logging
    • Current Buffer Statistics
• Viewing Connections
  • Searching the Connections
  • Filtering the Connection Log
  • Connections Log Functions
• Monitoring Core 0 Processes
• Using Packet Replay
  • Single Packets
    • Packet Crafting
    • Packet Buffer
  • Replay Pcap File
    • Replaying an IP Pcap File
    • Replaying a MAC Pcap File
  • Captured Packets
    • Captured Packets
    • Packet Detail
    • Hex Dump
• SonicWall Support
  • About This Document

Restarting FTP Logging

If automatic FTP logging is off, either because of a failed connection or simply disabled, you can restart it in Configure > Logging.

To restart FTP logging

1. Navigate to the Tools & Monitors > Packet Monitor page.
2. Select the General tab.
3. Select the Logging tab.
4. Verify that the settings are correct for each item on the page. (Refer to Configuring Logging Settings for more information.)
5. To change the FTP logging status page to active, select Log To FTP Server Automatically.
6. Optionally, test the connection by clicking Log Now.
7. To save your settings and exit the dialog, click Save.