SonicOS 7 Rules and Policies

Capturing and Exporting the Payload to a Text File Using Wireshark

To capture the data, launch Wireshark and click Capture > Interfaces to open a capture dialog. Start a capture on the interface with the netcat traffic. As soon as the capture begins, run the netcat command and then stop the capture.

Data Flow Through the Network in Wireshark shows the data flow through the network during such a connection (Vista Enterprise, June 2007):

Data Flow Through the Network in Wireshark

The hexadecimal data can be exported to a text file for trimming off the packet header, unneeded or variable parts and spaces. The relevant portion here is Microsoft… reserved. You can use the Wireshark hexadecimal payload export capability for this. For information about Wireshark, see Wireshark.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.