Configuring General DPI-SSL/TLS Server Settings

To enable Server DPI-SSL inspection

1. Navigate to the POLICY | DPI-SSL > Server SSL page.

   

2. Scroll to the General Settings section.

3. Select Enable SSL Server Inspection.

4. Select one or more of the services with which to perform inspection:

• Intrusion Prevention

• Gateway Anti-Virus

• Gateway Anti-Spyware

• Application Firewall

5. Click Accept.

6. Scroll down to the SSL Servers section to configure the server or servers to which DPI-SSL inspection is applied. See Configuring Server-to-Certificate Pairings.