SonicOS 7 DPI-SSH

Customizing Client DPI-SSH Inspection

By default, when DPI-SSH is enabled, it applies to all traffic on the firewall. You can customize to which traffic DPI-SSH inspection applies in the Inclusion/Exclusion section.

To customize DPI-SSH client inspection

  1. Go to the Inclusion/Exclusion section of the POLICY | DPI-SSH > Settings page.

  2. From the Address Object/Group Exclude and Include drop-down menus, select an address object or group to exclude or include from DPI-SSH inspection. By default, Exclude is set to None and Include is set to All.
  3. From the Service Object/Group Exclude and Include drop-down menus, select an address object or group to exclude or include from DPI-SSH inspection. By default, Exclude is set to None and Include is set to All.
  4. From the User Object/Group Exclude and Include drop-down menus, select an address object or group to exclude or include from DPI-SSH inspection. By default, Exclude is set to None and Include is set to All.
  5. Click Accept.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.