Secure Mobile Access 12.4 CMS Administration Guide

File Options

The File Options settings allow you to specify which file types will be sent to the Capture ATP service for analysis and the maximum size of those files.

Setting the File Types

You can select the types of files to be submitted to Capture ATP for inspection.

To set which file types are analyzed

  1. Navigate to Managed Appliances > Configure.
  2. Click Define Policy.
  3. In the User Access section, select Capture Advanced Threat Protection.
  4. Click the Capture ATP tab.
  5. Select the file types you want analyzed by the Capture ATP service. By default, only the Executables (PE, Mach-O, and DMG) file type is enabled.
  6. Click Save.

Setting the Maximum File Size

You can select the maximum size of files to be submitted to Capture ATP for inspection.

To set the maximum file size

  1. Navigate to Managed Appliances > Configure.
  2. Click Define Policy.
  3. In the User Access section, select Capture Advanced Threat Protection.
  4. Click the Capture ATP tab.
  5. Choose one of the options:

    • Select Use the default value (10MB) to use the default file size of 10MB.
    • Restrict to __ MB to specify your own maximum file size.

      The maximum file size supported by SMA 12.4.1 is 50MB.

  6. Click Save.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.