Secure Mobile Access 12.4 CMS Administration Guide

Enabling Capture ATP

After being successfully licensed, Capture ATP must be enabled before it will begin analyzing files for malicious behavior.

To enable Capture ATP

  1. Navigate to Managed Appliances > Configure.
  2. Click on Define Policy.
  3. In the User Access section, click Capture Advanced Threat Protection.

  4. Click the Capture ATP tab.
  5. Select Enable Capture Advanced Threat Protection.

  6. To verify the connection to the Capture ATP service, click the Test connection button.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.