Secure Mobile Access 12.4 Administration Guide

Specifying the Default Realm

If you specify more than one authentication realm, you must designate one as the default. To authenticate a user, the appliance must know which realm the user belongs to. If only one realm is enabled, the appliance automatically uses it. If multiple realms are enabled, the appliance needs to know which one to use. A user can select the appropriate one from a list, but the process is easier for the user if you designate a default realm in AMC. (Even if you configure only one realm, you should specify it as the default; otherwise AMC displays the warning message, There is no default realm selected, on the Realms page.)

To specify a default realm

  1. In the AMC, navigate to User Access > Realms.

  2. In the Default realm list (at the bottom of the AMC page), select the authentication realm that will be the default.

    This list shows only those realms that are enabled and configured to be displayed.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.