Secure Mobile Access 12.4 Administration Guide

Specifications and Rack Installation

After you’ve unpacked the appliance, you’re ready to install and configure it on your network. The appliances are designed to fit on a standard, 19-inch telecom rack. Before connecting the appliance, make sure that you have sufficient space and adequate power.

The SMA 7200,7210 and SMA 6200, 6210 include:

  • Rails (in kit, not attached)
  • Standard IEC 60320 C13 to NEMA 15 USA only power cord(s)
  • 6 1Gb Ethernet ports
  • 2 10Gb SFP+ ports (on SMA 7200, 7210)
  • 2 USB ports
  • 1 DIAG port
  • 2 500 GB SATA hard drives:
Specifications
SMA 7200, 7210SMA 6200, 6210
Regulatory Model/Type1RK30-0AF1RK31-0B0
CPUE3-1275 3.5GHzI5-4570S 2.9GHz
RAM4 x 16GB DDR3 1600MHz ECC4 x 8GB DDR3 1600MHz ECC
Network ports8 (6-port 1GE + 2-port 10Gb SFP+)6 (6-port 1GE)
Power supplyDual hot swappableFixed
Front panel illustrationSee SMA 6200/6210/7200/7210 Front PanelsSee SMA 6200/6210/7200/7210 Front Panels

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.