Secure Mobile Access 12.4 Administration Guide

Configuring Custom Connections

By default, Connect Tunnel is configured to access the realm and appliance from which it was downloaded. Use the Custom Connections options to configure Connect Tunnel to access a different default appliance or realm, or list other appliances and realms the client can connect to.

To configure custom connections

  1. In the AMC, navigate to System Configuration > Services.

  2. In the Access Services section, under Network tunnel service area, Configure.

    The Network Tunnel Service page displays.

  3. In the Custom Connections section, click the + (New) icon.

  4. Select the type of connection from the dropdown list:

    • Connection to this appliance

    • Connection to a different appliance

    The Custom connections table displays editable fields for the connection name, appliance, and realm.

  5. Type a descriptive name for the custom connection into the Connection name field.

  6. Type the FQDN or IP address of the appliance into the Appliance field.

  7. Type the realm name into the Realm field.

  8. Select Display notifications checkbox if notifications should be displayed when this custom connection is used.

  9. Select Prompt for reconnect checkbox if the user should be prompted to reconnect to this custom connection if disconnected.

  10. Click OK.

  11. When more than one custom connection is listed, to change the order of the connections, select the checkbox next to one custom connection and then click either Move Up or Move Down. The list is updated with the new order.

  12. To delete a custom connection, select the checkbox next to it and then click Delete.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.