Secure Mobile Access 12.4 Administration Guide

Adding Translated IP Address Pools

This section describes how to create a translated IP address pool using secure network address translation (Source NAT).

To add a translated IP address pool

  1. In the AMC, navigate to System Configuration > Services.

  2. In the Access Services section, under Network tunnel service area, Configure. The Network Tunnel Service page displays.

  3. In the IP Address Pools area, click the + (New) icon. The IP Address Pool page displays.

  4. In the Name field, type a name for the address pool.

  5. In the Description field, type a descriptive comment about the address pool.

  6. Click Translated address pool (Source NAT).

  7. In the IP address field, type the Source NAT address that will appear to back-end servers as the source of all client traffic. Ensure that this IP address is not in use elsewhere.

  8. Click Save.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.