Secure Mobile Access 12.4 Administration Guide

Enabling Capture ATP

After being successfully licensed, Capture ATP must be enabled before it will begin analyzing files for malicious behavior.

To enable Capture ATP

  1. In the AMC, navigate to User Access > Capture ATP.

  2. On the Capture ATP page, select Enable Capture Advanced Threat Protection.

  3. To verify the connection to the Capture ATP service, click the Test connection button.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.