SMA 10.2 Getting Started Guide for AWS

Logging into Virtual Office Using VASCO Two-Factor Authentication

To log in to the Secure Mobile Access Virtual Office using VASCO two-factor authentication

  1. Enter the IP address of the SMA appliance in your browser and press Enter.

  2. Select the appropriate domain from the Domain drop-down menu and click NEXT.

  3. Type in your user name in the UserID field.

  4. Enter the passcode in the Password field. Your entry in the password field depends on whether your system requires a PIN:

    • If you already have a PIN, enter the passcode in the Password field. The passcode is the user PIN and the VASCO Digipass token code. For example, if the user’s PIN is 8675 and the token code is 30966673, then the passcode is 867530966673.
    • If a PIN is required, but you do not yet have a PIN, enter the VASCO Digipass code in the Password field. You are prompted to create a PIN.
    • If the VASCO server does not require a PIN, simply enter the VASCO Digipass code.

    Consult with your network Administrator to determine if your configuration requires a PIN.

  5. Click LOGIN.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.