SMA 10.2 Getting Started Guide for AWS

Creating a New PIN

The RSA Authentication Manager automatically determines when users are required to create a new PIN. The SMA appliance prompts the user to enter new PIN.

To create a new PIN

  1. Enter the PIN in the New PIN field and again in the Confirm PIN field and then click OK. The PIN must be between four and eight characters long.

  2. The RSA Authentication Manager verifies that the new PIN is acceptable. If the PIN is accepted, you are prompted to log in with the new passcode.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.