• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for AWS Virtual Appliance
  • Installing SMA 500v for AWS
• Configuring the SMA 500v for AWS Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for AWS
  • De-registering an SMA 500v for AWS
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Generating Backup Codes

To generate backup codes

1. If you are not logged into the Secure Mobile Access Virtual Office user interface, open a web browser and type the Virtual Office interface URL in the Location or Address bar and press Enter.
2. Select the appropriate domain from the Domain drop-down menu.
3. Type in your user name in the UserID field and your password in the Password field, and then Click LOGIN.

4. Complete the authentication if prompted.

   The Virtual Office home page is displayed.

5. Click the user icon in the upper-right corner of the page and then click Settings.

   

6. In the ONE TIME PASSWORD SETTINGS section, click Generate Backup Code tab.

   

7. Click OK to save the file to your system.

   A file with backup codes is saved to your system. You can use each backup code only once.