• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for AWS Virtual Appliance
  • Installing SMA 500v for AWS
• Configuring the SMA 500v for AWS Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for AWS
  • De-registering an SMA 500v for AWS
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Disconnecting NetExtender

To disconnect NetExtender

1. Right click the NetExtender icon in the system tray to display the NetExtender icon menu and click Disconnect.
2. The NetExtender session disconnects after few seconds.

You can also disconnect by double-clicking on the NetExtender icon to open the NetExtender window and then clicking Disconnect.

When NetExtender is disconnected, the NetExtender window displays and gives you the option to either Reconnect or Close NetExtender.