• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for AWS Virtual Appliance
  • Installing SMA 500v for AWS
• Configuring the SMA 500v for AWS Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for AWS
  • De-registering an SMA 500v for AWS
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Configuring Batch File Commands

NetExtender Connection Scripts can support any valid batch file commands. For more information on batch files, see the following Wikipedia entry: http://en.wikipedia.org/wiki/.bat. The following tasks provide an introduction to some commonly used batch file commands.

1. To configure the script that runs when NetExtender connects, click Edit “NxConnect.bat.” The NxConnect.bat file is displayed.
2. To configure the script that runs when NetExtender disconnects, click Edit “NxDisconnect.bat.” The NxConnect.bat file is displayed.
3. By default, the NxConnect.bat file contains examples of commands that can be configured, but no actual commands. Too add commands, scroll to the bottom of the file.

4. To map a network drive, enter a command in the following format:

   net use drive-letter\\server\share password /user:Domain\name

   For example to if the drive letter is z, the server name is engineering, the share is docs, the password is 1234, the user’s domain is eng and the username is admin, the command would be the following:

   net use z\\engineering\docs 1234 /user:eng\admin

5. To disconnect a network drive, enter a command in the following format:

   net use drive-letter: /delete

   For example, to disconnect network drive z, enter the following command:

   net use z: /delete

6. To map a network printer, enter a command in the following format:

   net use LPT1 \\ServerName\PrinterName /user:Domain\name

   For example, if the server name is engineering, the printer name is color-print1, the domain name is eng, and the username is admin, the command would be the following:

   net use LPT1 \\engineering\color-print1 /user:eng\admin

7. To disconnect a network printer, enter a command in the following format:

   net use LPT1 /delete

8. To launch an application enter a command in the following format:

   C:\Path-to-Application\Application.exe

9. For example, to launch Microsoft Outlook, enter the following command:

   C:\Program Files\Microsoft Office\OFFICE11\outlook.exe

10. To open a Web site in your default browser, enter a command in the following format:

    start http://www.website.com

11. To open a file on your computer, enter a command in the following format:

    C:\Path-to-file\myFile.doc

12. When you have finished editing the scripts, save the file and close it.