• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for AWS Virtual Appliance
  • Installing SMA 500v for AWS
• Configuring the SMA 500v for AWS Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for AWS
  • De-registering an SMA 500v for AWS
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Configuring Remote Desktop Access on the Remote Computer

To allow remote desktop access to the computer that is the target of the RDP bookmark

1. Right-click the My Computer icon on the desktop, and select Properties.
2. Click the Remote tab.

3. Under Remote Desktop, select the check box for Allow connections from computers running any version of Remote Desktop (less secure). By default, RDP has Transport Layer Security (TLS) enabled.

   To use Network Level Authentication (NLA), which is a security enhancement for computers using RDP bookmarks, click the check box for Allow connections only from computer running Remote Desktop with Network Level Authentication (more secure).

4. Click OK.