• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for AWS Virtual Appliance
  • Installing SMA 500v for AWS
• Configuring the SMA 500v for AWS Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for AWS
  • De-registering an SMA 500v for AWS
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Other RADIUS Server Two-Factor User Authentication Process

To log in to the Virtual Office using another type of RADIUS server for two-factor authentication

1. Enter the IP address of the SMA appliance in your browser and press Enter.
2. Select the appropriate domain from the Domain drop-down menu and click NEXT.

3. Type in your user name in the UserID field.

   

4. Enter your password in the Password field.
5. Click LOGIN.

6. You are prompted to enter additional information, the details of which depends on the type of RADIUS server used. The example below shows an M.ID RADIUS server that first prompts you to “Please enter the M.ID PIN.” Enter the PIN in the Challenge field and then click OK.

   

7. You are then prompted to “Please enter the M.ID Passcode.” Enter the passcode received through email or text message in the Challenge field and then click OK.