• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for AWS Virtual Appliance
  • Installing SMA 500v for AWS
• Configuring the SMA 500v for AWS Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for AWS
  • De-registering an SMA 500v for AWS
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Configuring One-Time Password Settings for SMS

You can configure one-time password settings for SMS only when the administrator has selected Short Message as the login OTP authentication method.

To configure One-Time Password settings for Mobile App

1. If you are not logged into the Secure Mobile Access Virtual Office user interface, open a web browser and type the Virtual Office interface URL in the Location or Address bar and press Enter.
2. Select the appropriate domain from the Domain drop-down menu.
3. Type in your user name in the UserID field and your password in the Password field, and then click LOGIN.

4. Click the user icon in the upper-right corner of the page and then click Settings.

   

5. In the one time password settings section:

   

   1. Enable One-Time Password.
   2. Enable Short Message.
   3. Select a template from the Template drop-down menu.
   4. Enter your phone number registered with the cell phone service provider in the Phone Number box.
   5. Click Accept.
6. Optionally, select GENERATE BACKUP CODE to download a generated list of backup codes to use backup code as an authentication mode to log in to Virtual Office.