Secure Mobile Access 10.2 Deployment Guide

Connecting the SMA to the Gateway

To connect the SMA on the LAN

  1. Connect one end of an Ethernet cable to an unused port on your LAN hub or switch.
  2. Connect the other end of the Ethernet cable to the X0 port on the front of your SonicWall SMA 210/410.

    The X0 Port LED lights up indicating an active connection.

  3. Configure the SMA X0 IP address. Refer to Configuring the X0 IP Address for more information.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.